Univair

U10676-000 UNIVAIR FUEL GAUGE ASSEMBLY - FITS PIPER

Applicability: Piper PA-16, PA-20 FAA-PMA approved

U10804-000 UNIVAIR FUEL GAUGE - FITS PIPER

Applicability: Piper PA-11, PA-18 FAA-PMA approved Replacement parts can be purchased separately; see list below Replacement Parts DescriptionPart...

U10853-000 UNIVAIR FUEL GAUGE FLOAT BALL - FITS PIPER

Applicability: Piper PA-11, PA-18 FAA-PMA approved

U70771-000 UNIVAIR FUEL CONTROL CLAMP - FITS PIPER

Applicability: Piper J-3, L-4, NE-1, NE-2 FAA-PMA approved Supercedes part numbers 70771-000, 70771-00, 70771, 7576

U60750-006 UNIVAIR FUEL CAP GASKET - FITS PIPER

Outer diameter: 2.175 inches Inner diameter: 1.385 inches Applicability: Piper PA-11, PA-12, PA-18, PA-20, PA-22 Also used on Stinson aluminum caps FAA-PMA approved Supercedes part numbers...

U85327-002 UNIVAIR FUEL CAP COVER ASSEMBLY - FITS PIPER

Applicability: Piper PA-18-150, serial numbers 18-7809001 to 18-8309025, and 1809001 to 1809019 Complies with Service Bulletin 979 Cover only FAA-PMA approved Supercedes part numbers 85327-002,...

U71031-000 UNIVAIR FUEL CAP - FITS PIPER

U60750-002 UNIVAIR FUEL CAP - FITS PIPER

Applicability: Piper PA-11, PA-12, PA-18, PA-20, PA-22 Gasket included Comply with AD 78-10-03 Eliminates requirements of AD 59-10-08 FAA-PMA approved Supercedes part numbers 60750-002,...

U21431-000 UNIVAIR FRONT WING HINGE FITTING - FITS PIPER

Applicability: Piper J-3, L-4A, L-4B, PA-11 FAA-PMA approved Supercedes part numbers 21431-000, 21431-00

U85554-002 UNIVAIR FRONT LIFT STRUT - FITS PIPER

End repetitive AD inspections of your struts and forks with Univair's new oiled and sealed wing struts with 5⁄8 inch fork. Applicability: Piper PA-11 Includes strut fork Comply with AD...

U89497-102 UNIVAIR FRONT STRUT - HEAVY DUTY - FITS PIPER

End repetitive AD inspections of your struts and forks! These struts include the new heavy duty, heat treated, 5/8 inch rolled thread fork and comply with AD 2015-08-04. Applicability: Piper...

U14426-000 UNIVAIR SPINNER FRONT PLATE - FITS PIPER

Applicability: Piper PA-18, PA-22 (150-160hp, serial numbers 2378 to 2425 to 7642), PA-25 (150hp) FAA-PMA approved

U13664-000 UNIVAIR FRONT SPINNER PLATE - FITS PIPER

Applicability: Piper PA-12, PA-16, PA-18, PA-20, PA-22 (108, 125 and 135hp, serial numbers 534 to 7642 with Sensenich AM Series propeller) FAA-PMA approved

U10573-000 UNIVAIR FRONT SPAR - FITS PIPER

Applicability: Piper J-4 FAA-PMA approved

U12801-000 UNIVAIR FRONT SPAR BUTT FITTING - FITS PIPER

Applicability: Piper J-3 (wood spar), L-4A, L-4B FAA-PMA approved

U14401-002 UNIVAIR STRUT REINFORCEMENT ANGLE - FITS PIPER

Front spar #1 strut reinforcement angle Applicability: Piper J-3, PA-11