Univair

U11641-004 UNIVAIR RUDDER CABLE - FITS PIPER

Applicability: Piper PA-16, PA-20 Length: 181-1/2 inch Galvanized steel Highlighted part in illustration FAA-PMA approved

U12651-000 UNIVAIR RUDDER BRACKET - FITS PIPER

Applicability: Piper J-5C, PA-12, PA-14, PA-15, PA-16, PA-17 FAA-PMA approved

U15726-002 UNIVAIR RUDDER ASSEMBLY - UNCOVERED - FITS PIPER PA-18

This rudder complies with AD 2025-02-11. Univair rudders for Piper aircraft have been made with 4130N steel tube since approval in 1976. Applicability: Piper PA-18, serial numbers 7509123 and...

U41313-000 UNIVAIR RUDDER ASSEMBLY - FITS PIPER

This rudder complies with AD 2025-02-11. Univair rudders for Piper aircraft have been made with 4130N steel tube since approval in 1976. Applicability: Piper J-3, L-4A, L-4B,...

U40622-008 UNIVAIR RUDDER ASSEMBLY - UNCOVERED - FITS PIPER

This rudder complies with AD 2025-02-11. Univair rudders for Piper aircraft have been made with 4130N steel tube since approval in 1976. Applicability: Piper PA-18, PA-20, PA-22 FAA-PMA...

U40622-007 UNIVAIR RUDDER ASSEMBLY - UNCOVERED - FITS PIPER

This rudder complies with AD 2025-02-11. Univair rudders for Piper aircraft have been made with 4130N steel tube since approval in 1976. Applicability: Piper PA-18 (150hp), PA-20, PA-22 For...

U40622-000 UNIVAIR RUDDER ASSEMBLY - UNCOVERED - FITS PIPER

This rudder complies with AD 2025-02-11. Univair rudders for Piper aircraft have been made with 4130N steel tube since approval in 1976. Applicability: Piper J-5C, PA-12, PA-14, PA-15, PA-16,...

U40721-002 UNIVAIR RUBBING BLOCK - FITS PIPER

Applicability: Piper PA-14, PA-20, PA-22 FAA-PMA approved Supercedes part numbers 40721-002, 40721-02

U40721-000 UNIVAIR RUBBING BLOCK - FITS PIPER

Applicability: Piper J-3, PA-11, PA-12, PA-18 Stabilizer cable guide rubbing block FAA-PMA approved Supercedes part numbers 40721-000, 40721-00

U10466-033 UNIVAIR ROUND CLAMP - FITS PIPER

Tailpipe support clamp, bottom Applicability: Piper PA-18 (150hp), PA-22 (serial numbers 22-9205 and up) FAA-PMA approved

U452-357 UNIVAIR ROD END BEARING - FITS PIPER

Thread: 1/4-28 Bore: 3/16 inch Type Shank: Male Supercedes part number M34-14

U452-335 UNIVAIR ROD END BEARING - FITS PIPER

Flap push-pull bearing Thread: 1/4-28 Bore: 3/16 inch Type Shank: Female Applicability: Piper J-4, J-5, PA-12, PA-14, PA-20, PA-25 Supercedes part numbers F34-14 and GMW-3M-470

U13107-005 UNIVAIR ROD - FITS PIPER

U60571-001 UNIVAIR YOKE INSPECTION COVER - RIGHT - FITS PIPER

Applicability: Piper J-3, PA-11, PA-12, PA-14, PA-18 FAA-PMA approved Supercedes part numbers 60571-001, 60571-01

U12412-001 UNIVAIR LEADING EDGE TIP SKIN - RIGHT - FITS PIPER

Wingtip cover, right hand Applicability: Piper J-5C, PA-12, PA-14 Highlighted part in illustration See charts below for aircraft applicability and related skins Leading edge skins are numbered...

U60803-001 UNIVAIR WING ROOT FAIRING - RIGHT - FITS PIPER

Applicability: Piper J-3, PA-11 FAA-PMA approved Supercedes part numbers 60803-001, 60803-01