Univair

U13716-005 UNIVAIR COWL ANGLE - FITS PIPER

U10796-000 UNIVAIR COWL ATTACH ANGLE - FITS PIPER

Applicability: Piper PA-18 95hp

U14435-000 UNIVAIR BRAKE LINE COVER PLATE - FITS PIPER

Applicability: Piper PA-18 Highlighted part in illustration

U11683-010 UNIVAIR CENTER FLAP LEADING EDGE SKIN - LEFT - FITS PIPER

Applicability: Piper PA-18 Length: 42 inches Alternate blank skin available (60 inches long) - part number CSI-1032-060 An OVERSIZE FEE will be included in the shipping costs at checkout. For...

U11683-007 UNIVAIR OUTBOARD FLAP LEADING EDGE SKIN - LEFT AND RIGHT - FITS PIPER

Applicability: Piper PA-18 Length: 10-5/8 inches Alternate blank skin available (60 inches long) - part number CSI-1032-060

U11683-006 UNIVAIR INBOARD FLAP LEADING EDGE SKIN - LEFT AND RIGHT - FITS PIPER

Applicability: Piper PA-18 Length: 5-7/8 inches Alternate blank skin available (60 inches long) - part number CSI-1032-060

U13124-001 UNIVAIR LANDING GEAR VEE - RIGHT - FITS PIPER PA-22

Applicability: Piper PA-22, serial numbers 1 to 4459 Covered FAA-PMA approved

U50301-000 UNIVAIR INSIDE CHANNEL COVER - FITS PIPER

Applicability: Piper J-3 FAA-PMA approved Supercedes part numbers 50301-000, 50301-00

U11683-011 UNIVAIR CENTER FLAP LEADING EDGE SKIN - RIGHT - FITS PIPER

Applicability: Piper PA-18 Length: 42 inches Alternate blank skin available (60 inches long) - part number CSI-1032-060

U12694-003 UNIVAIR THROTTLE CONTROL CABLE - FITS PIPER

Applicability: Piper PA-18, PA-18A, PA-18S, PA-18AS, with 105-150hp Lycoming engine Length: 55.0 inches Material: Stainless steel FAA-PMA approved

U12694-002 UNIVAIR THROTTLE CONTROL CABLE - FITS PIPER

Applicability: Piper J-3, PA-11, PA-11S, PA-12, PA-18, PA-18S, with electrical system Length: 61.25 inches Material: Stainless steel FAA-PMA approved Supercedes part numbers 12694-002,...

U12694-000 UNIVAIR THROTTLE CONTROL CABLE - FITS PIPER

Applicability: Piper PA-18, PA-18S, without electrical system Length: 55.0 inches Material: Stainless steel FAA-PMA approved

J20981-000 UNIVAIR CONTROL SUPPORT - FITS PIPER

Torque tube front bearing bracket assembly Applicability: Piper PA-18 Supercedes part number 20981-002

U13731-002 UNIVAIR FRONT CONTROL STICK TOP - FITS PIPER

Applicability: Piper PA-18 135-150hp Length: 15.75 inch FAA-PMA approved

U13729-000 UNIVAIR FRONT CONTROL STICK LOWER STUB - FITS PIPER

Applicability: Piper PA-18 (135-150hp, serial numbers 18-2892 and up), PA-25 Highlighted part in illustration FAA-PMA approved

U13731-004 UNIVAIR CONTROL STICK ASSEMBLY - FITS PIPER PA-18

Applicability: Piper PA-18 Length: 14 inches FAA-PMA approved