Product Description
- Basic Design: 1C172
- FAA Type Certificate: P910
- SAE Number/Type of Flange: SAE #3
- Diameter of Circle: 5.250 inches
- Bolt Diameter: 3/8 inch
- Number of Bolts: 6
- Spacer/Adapter: None
- Installation Weight: 32.3 lbs
- Installation Bolt Kit: See note
NOTE: DM and MDM models are normally shipped with standard bolts suitable for variety of A/C (bolt kit part number UB4622-30). However these models on Maule M-4 series require a bolt different than that supplied with standard; therefore, when ordering for this installation specify propeller with "Special A-2513-23 Bolt Kit."
Applicability Chart
| Aircraft | Engine | Prop Type | Maximum Diameter | Minimum Diameter |
|---|---|---|---|---|
| Cessna 170, 170A, 170B | Continental C-145-2, -2H | Cruise | 76 | 74.5 |
| Maule Bee Dee M-4, M-4, M-4C, M-4S, M-4T "Jetasen" | Continental O-300-A, -B | Standard | 76 | 74.5 |
DM and MDM models are normally shipped with standard bolts suitable for variety of A/C (bolt kit part number B-4622-30). However these models on Maule M-4 series require a bolt different than that supplied with standard; therefore, when ordering for this installation specify propeller with "Special A-2513-23 Bolt Kit".
DM, GM, and SFC model propellers may have basic design designations of 1A170 or 1A175. 1A170 models include propellers with diameters under 78 inches while 1A175 models include those of 78 inches and above. Blades on both models are identical except for pitch distribution.
