MS25017-5 CIRCUIT BREAKER - 5 AMP

MS28741 CESSNA HOSE

MS24462-4 CESSNA BEARING

For Cessna 170 hinge and elevator bellcrank bushing For Cessna 180, 185, 182 through 182D inboard and outboard hinge bushing For 1962-1982 Cessna 182 elevator arm upper bushing Supercedes part number AR4-1

MS35822-15D CONTINUOUS BUTT HINGE - 6 FEET

Continuous butt hinge (piano hinge) Material: Carbon steel, plated Hinge has minimum operating range of 0° to 275° Pin Diameter: 3/32 inch Dimensions: L: 72 inch W: 1-1/2 inch T: 3/64 inch

MS35822-13D CONTINUOUS BUTT HINGE - 6 FEET

Continuous butt hinge (piano hinge) Material: Carbon steel, plated Hinge has minimum operating range of 0° to 275° Pin Diameter: 3/32 inch Dimensions: L: 72 inch W: 1-1/16 inch T: 3/64 inch

MS20115F6 CABLE SHACKLE

Material: Chrome steel Shackle and Cable Strength: 4,200 lbs Dimensions A: 17/64 inch B: 17/32  inch C: 9/32  inch D: 5/16 inch E: 3/8 inch Related parts Thimble: AN100-6 Clevis Pin: MS20392-3C17

MS20115F5 CABLE SHACKLE

Material: Chrome steel Shackle and Cable Strength: 3,200 lbs Supercedes part number AN115-32 Dimensions A: 13/64 inch B: 13/32 inch C: 7/32 inch D: 1/4 inch E: 9/32 inch

MS20007-36 INTERNAL WRENCHING BOLT

Internal wrenching bolt, undrilled Material: Steel Length: 3-1/16 inch Grip: 2-1/4 inch Thread: 7/16-20 Head Diameter: 3/4 inch Head Height: 7/16 inch Hex: 5/16 inch

MS20007-34 INTERNAL WRENCHING BOLT

Internal wrenching bolt, undrilled Material: Steel Length: 2-15/16 inch Grip: 2-1/8 inch Thread: 7/16-20 Head Diameter: 3/4 inch Head Height: 7/16 inch Hex: 5/16 inch

MS20007-32 INTERNAL WRENCHING BOLT

Internal wrenching bolt, undrilled Material: Steel Length: 2-13/16 inch Grip: 2 inch Thread: 7/16-20 Head Diameter: 3/4 inch Head Height: 7/16 inch Hex: 5/16 inch For Citabria and Decathlon landing gear 2 required (priced and sold individually)...

MS20007-28 INTERNAL WRENCHING BOLT

Internal wrenching bolt, undrilled Material: Steel Length: 2-9/16 inch Grip: 1-3/4 inch Thread: 7/16-20 Head Diameter: 3/4 inch Head Height: 7/16 inch Hex: 5/16 inch For Scout landing gear 2 required (priced and sold individually) FAA-PMA approved

MS90725-57 HEX HEAD CAP SCREW

MS20074-04-04 ENGINE BOLT - 1/4 X 19/32 INCH

Engine bolt, drilled hex head Material: Steel, cadmium plated Length: 19/32 inch Thread: 1/4-20 Grip: 1/16 inch Wrench Size: 7/16 inch Supercedes part number AN74A4

MS20073-04-06 ENGINE BOLT - 1/4 X 25/32 INCH

Engine bolt, drilled hex head Material: Steel, cadmium plated Length: 25/32 inch Thread: 1/4-28 Grip: 1/4 inch Wrench Size: 7/16 inch

MS27642-33 BEARING

MS21025-24 HEXAGON CASTLE NUT

Hexagon castle nut For gears with 1.5 inch drilled axles Applicability: Ercoupe (serial numbers 813 and up), Piper PA-18 Material: Steel, cadmium plated Thread: 1-1/2-16 Supercedes part numbers F33213, 415-33213 Dimensions: A: 1-3/4 inch B:...